| Door Panel Material | High- quality Zinc Alloy Panel |
| Door Frame Material | Alluminum Profile |
| Filling Material | Aluminum Honeycomb, Graphite Modifiied PU Form. |
| Sound insulation Feature | Excellent |
| Heat Insulation Feature | Excellent |
| Standard Overall Size | 880 × 2050 mm |
| Standard Sight Size | 760 ×1960mm |
| Standard Bottom Clearance Size | 40mm |
| Cutomize Service | Customizable sizes are available |
| Color | Thermal Transfering Printing, Colors are optional |
| FOB Guangzhou Port | US $55/ PC |
| Minimum Order Quantity | 800 PC |
| Time Of Delivery | 10~15 Days |
The HB038 is a single-leaf interior door for bedrooms, built around a high-quality zinc alloy panel set into an aluminum profile frame. Behind the panel, an aluminum honeycomb core and graphite modified PU foam filling give the leaf a solid, consistent body, so it closes with weight behind it rather than the light rattle of a hollow door.
It is made for the bedroom opening — a metal-based alternative to a timber leaf where the brief calls for a flat, modern face that will not need repainting every few years. Standard overall and sight sizes cover the common bedroom opening, and sizes can be produced to your drawings where a room runs to a different module. The single-leaf configuration means one door per opening, so a schedule of forty bedrooms is simply forty doors.
This model sits in our wholesale zinc alloy interior doors range, alongside the other bedroom doors we supply, which means a distributor or contractor can build a single door schedule instead of buying each opening from a different source.
Colours are applied by thermal transfer printing rather than left to a single factory stock shade, so the face can be matched to the flooring, joinery and wall finish already specified for the job, and repeated across the other interior room doors in the same property. Hardware follows the model you select: lever handles, locks and the frame set are confirmed against the specification you send us.
The swing opening is the configuration most bedroom layouts are already built around. The leaf rotates on its hinges from one edge, so the door needs a clear quarter-circle of floor on the side it opens into — normally into the room, parking against a wall or a wardrobe run so the arc never crosses the bed.
That arc is the thing to plan. In a master bedroom it usually clears without trouble. In a compact apartment bedroom the bed position often decides the hand: hinges on the wall side and the door parks against the wall; hinges on the other edge and it sweeps across the room. Tell us which hand you need when you order, because it cannot be changed once the leaf has been drilled.
Guest and children's bedrooms gain the most from a swing door. It gives a full-width clear opening for moving a bed, a cot or luggage in and out, and it can be operated with one hand and a push — useful when someone is carrying a child or a laundry basket. Rooms with furniture standing close to the opening are the ones to check twice.
Hotel guest rooms almost always use an inward-opening leaf with a closer, so the arc is controlled rather than pushed. Villa bedrooms with wider openings can still take a single leaf, but confirm the leaf size and hinge specification with us rather than assuming the standard module scales up.
New construction and renovation behave differently. On a new build the frame goes against a set opening and the floor level is known. In a renovation the old opening is rarely square, so measure the structural opening rather than the existing leaf, and check the finished floor height before you confirm the bottom clearance.
A zinc alloy door does not pretend to be a timber door, and that is the point. The face is a flat metal plane, so the profile stays crisp and the shadow lines around the frame are sharp — a look that sits comfortably with modern interior doors in minimalist, contemporary and modern-classic schemes alike.
The woodgrain finishes are applied by thermal transfer printing, which carries the pattern across the full face rather than stopping short at the edges. The grain runs vertically on the faces shown here, which reads taller on a standard-height leaf than a horizontal pattern would, and it pairs naturally with a darker frame and a black lever handle.
Small details carry the design further than the panel colour. A circular handle emblem or an ornamental medallion at the centre of the leaf turns an otherwise plain face into a feature, and those pieces can be matched to the handle finish so the door reads as one object rather than a slab with hardware bolted onto it.
Because the finish is printed rather than stained, the same pattern repeats accurately across a batch. That is what lets a developer keep every bedroom door on a floor identical, and what lets a distributor hold one face design across a whole range of sizes.
Coordination is the last step. Bring the floor, the wall finish, the wardrobe fronts and the lighting temperature together before you fix the colour, because a grey woodgrain that looks right under showroom lighting can shift under warm interior light.
A bedroom door is not just an entrance between two rooms; it is the line between private and shared. In a house it separates a bedroom from a corridor, a living area or a study. In a hotel it separates a guest from the whole floor.
Privacy works on two levels. The first is visual: a solid zinc alloy panel gives a full-height face with no glazing, so there is no sightline into the room once the door is closed. The second is a matter of fit and sealing, and it depends far more on how the leaf meets its frame than on the panel alone — a well-fitted door with an even gap, a proper stop and a threshold or drop seal where the specification calls for one will do more for perceived quiet than a heavier leaf hung badly.
Perimeter sealing is worth planning at the frame stage rather than after handover. If the corridor outside a room is noisy, tell us when you specify, because the seal and the door stop arrangement change what is possible. The same applies where a closer is required on a hotel guest room: the closer controls how the leaf meets the frame, so its position has to be decided before the hinges are set.
Consistency supports privacy too. When every bedroom door on a floor is the same colour, the same height and the same handle, the private zones read as a coherent run rather than a series of mismatched openings — which is exactly what guests notice in serviced apartments and boutique hotels.
A door carries the style of a room more than most people expect, because it is the one large vertical plane that appears in every view. This model works with modern interior design because its face is flat, its lines are straight, and its colour is applied rather than left as a raw material.
In a minimalist bedroom the door can recede: a plain face, a slim lever handle, and a frame colour close to the wall so the opening almost disappears. In a contemporary scheme with darker joinery the same door becomes the anchor — a dark frame and a woodgrain face tying the wardrobe run and the bedhead together.
Coordination comes down to three surfaces: the floor, the wardrobe front and the wall. Pick the door finish against those three rather than against a photograph, because a printed woodgrain shifts under warm interior lighting. Ask your sales contact about a finish sample so you can stand it against the actual flooring before committing a batch.
Handle choice changes the read too. A black lever on a dark face is quiet and architectural; a gold or copper emblem on a lighter face makes the door a feature. Either direction works alongside modern interior doors in this range, as long as the hardware finishes repeat elsewhere in the room — on the wardrobe pulls, the tapware or the lighting.
For a whole property the same logic scales. Carrying one door design across bedrooms, dressing areas and studies is what makes an apartment or a villa feel designed rather than assembled.
We supply this door to distributors, wholesalers, contractors, developers, interior designers and project buyers working across residential and hospitality interiors. The conversation usually starts with a door schedule rather than a single opening.
Send us the opening sizes, the number of leaves, the finish direction and the hardware you want, and we will confirm what can be produced and what needs adjusting. Where a distributor wants a specification outside the current range, we can discuss options against the model. OEM zinc alloy room doors are handled the same way, with your own finish or packing specification agreed before production.
Packaging and project specifications matter as much as the door itself on a container order. We confirm how the leaves and frames are packed, how the hardware is boxed, and how the shipment is phased so that doors for a completed block are not sitting on site waiting for the next one.
As a zinc alloy interior door supplier we work with buyers who need one consistent product repeated across many openings, and that is the standard this model is set up for: the same leaf, the same frame, the same finish, shipment after shipment.
| Door material | Zinc alloy panel (high quality) |
| Door frame | Aluminum profile |
| Core filling | Aluminum honeycomb + graphite modified PU foam |
| Door type | Swing / hinged, single leaf |
| Installation | Interior wall opening |
| Standard overall size | 880 × 2050 mm |
| Standard sight size | 760 ×1960mm |
| Standard bottom clearance | 40 mm |
| Sound insulation | Excellent |
| Heat insulation | Excellent |
| Colour and finish | Thermal transfer printing; colours optional, finish per model |
| Hardware | Available according to model |
| Custom sizes | Available |
| Application | Interior bedroom |
Boniven is a China-based sourcing and export partner for building material buyers. We work with a network of more than 100 vetted manufacturers and suppliers, which lets you consolidate different categories into one order instead of managing several factories yourself. Our team handles supplier matching, specification checks, inspection before loading, customisation coordination and export paperwork, and we plan shipments around your project phases or your regular replenishment cycle. Send us your market, target price level and delivery window, and we will map the supply chain behind your order.
It is an interior door for bedrooms, made with a high-quality zinc alloy panel set into an aluminum profile frame and hung on a conventional hinged, swing-opening leaf. Inside the leaf there is an aluminum honeycomb core and graphite modified PU foam filling, and the face is finished by thermal transfer printing. It is a metal-based alternative to a timber bedroom door, fitted and adjusted in the same way as any hinged door.
Master bedrooms, guest bedrooms, children's rooms, apartment and villa bedrooms, and hotel guest rooms. The same door also suits serviced apartments, boutique hotels and villa hotels, and it coordinates with the other interior room doors on the same floor so a corridor reads as one run. It is an interior bedroom door rather than a bathroom or exterior door, so for wet rooms we would point you to the aluminum glass range.
A swing door rotates on hinges from one edge and needs clear floor space for its arc. A sliding door travels along a track and needs wall length instead of floor space, which suits narrow rooms but puts the panel in front of a wall. This bedroom door is a hinged swing door, so it gives a full-width clear opening when open and seals along its perimeter when closed.
Yes. A hotel floor is one of the clearest uses for it: the same leaf, frame, handle and lock repeated across every guest room, in a finish that stands up to regular cleaning. An inward-opening leaf with a door closer is the usual arrangement for a guest room, and the closer position should be decided before the hinges are set.
Yes. The zinc alloy panel and aluminum frame make this a metal bedroom door, and metal interior doors of this construction do not absorb moisture or need refinishing the way a painted timber leaf does. The metal face is finished by thermal transfer printing, so it still reads as a woodgrain or a solid colour rather than bare metal.
Dimensions, finish colour, hardware and configuration can all be discussed against the model and the project. Where a distributor needs their own specification we handle OEM zinc alloy room doors with the finish, handle set and packing agreed before production. Send the opening sizes and the finish direction you want and we will confirm what is possible.
Yes. As a zinc alloy interior door supplier we work with distributors, wholesalers, contractors, developers and project buyers, and this model is supplied in quantity for door schedules and container orders. Tell us the number of openings, the sizes and the finish you need, and our team will confirm what we can supply against the model.
The leaf does not swell, splinter or lift at the edge in a humid room, there is no repainting cycle to budget for, and the printed finish repeats accurately across a batch so a whole floor stays consistent. The hinged configuration also gives a full-width clear opening and parks against the wall, which is what most bedroom layouts are already designed around.
Colour and grain are applied by thermal transfer printing, which fuses them into the surface coating, so the pattern does not sit on top as a film. Because the process repeats a printed design rather than staining individual leaves, one finish carries across a batch. Ask your sales contact about a finish sample and check it against the flooring and wardrobe fronts before you commit the order.