HB2620 is a sliding glass partition carried on an aluminum frame. Two or four framed panels run in a track, pass one another and stack at one end, so an open-plan floor can be closed for a meeting, a guest or a quiet hour and opened again without touching the walls.
The frame does the structural work and the glass does the visual work. Each pane sits inside an aluminum perimeter with a horizontal cross rail, which makes the screen read as joinery rather than as a frameless glass wall and lets it line up with skirting, ceiling height and the doors already on the floor. Clear glass keeps light and sightlines moving between the two spaces; the frame only marks where the boundary falls.
As an aluminum glass room divider supplier, Boniven supplies this model to building material distributors, interior door suppliers, contractors and brand owners rather than to single-room buyers. An order is usually a set of dividers for a showroom display, a floor of apartments, a hotel guest-room block or a villa refurbishment, and the specification is agreed against drawings before production starts.
In daily use it behaves like a large sliding door. The panels travel on a head track and a floor track, the leading panel carries the pull handle, and the stack sits wherever the plan can spare the width. That is why the layout is settled on the drawing rather than on site: the stacking side, the panel widths and the track position all come out of the opening dimensions.
| Model | HB2620 |
|---|---|
| System | Multi-panel sliding glass partition with framed panels |
| Frame material | Aluminum |
| Frame finishes | Five standard colours; other colours on request |
| Glass construction | 10+2 mm (PVB/EVA) laminated glass, double-side regular clear float |
| Clear float builds | 10+2 mm (PVB/EVA)+10, +13, +14, +15, +16, +17 and +18 |
| Wire-laminated build | 10+2 mm (PVB/EVA)+17 horizontal line wire laminated glass, regular clear float |
| Flocked glass | Single-side flocked laminated glass in reference codes 10018, 10211, 10212, 22444 and 24463 |
| Panel configurations | Two-leaf and four-leaf sets; other layouts drawn to the opening |
| Track and hardware | Head track, floor track with flush option, vertical pull handles, runners and fixings |
| Dimensions | Made to the finished opening and confirmed on approved drawings |
| Typical use | Interior partition doors between living, dining, office, showroom and guest-room zones |
Residential developments. Apartment and villa buyers use the divider to make one large room behave as two: a living area that closes for dinner, a study that becomes private during a call, a dressing zone separated from the bedroom without a solid wall. Because the panels slide rather than swing, the plan keeps the floor space a hinged door would need.
Hospitality. Hotels and serviced apartments buy matched sets floor after floor, and the value there is repeatability — the same frame colour, glass build and handle position in every room, so a replacement years later still matches. Suite living areas, guest-room divisions and meeting rooms off a lobby all run on the same hardware family.
Offices and meeting rooms. A room that opens for an all-hands and closes for a client call uses less floor plate than two fixed rooms. Interior glass partition doors keep the daylight and the sightline into the space, and the frame colour is normally chosen to match the door and window systems already specified.
Showrooms and display spaces. Display zones can be marked without blocking the view across the floor — separation for a category rather than a wall that hides the back of the store.
Renovation and refurbishment. Where a solid wall would mean moving services or reworking a structural opening, a sliding screen is often the shorter route. Most interior room divider doors in this range are drawn to the existing opening rather than to a nominal size, which is what makes retrofit work practical.
Boniven is a China-based sourcing and export partner for building material buyers. We work with a network of more than 100 vetted manufacturers and suppliers, which lets you consolidate different categories into one order instead of managing several factories yourself. Our team handles supplier matching, specification checks, inspection before loading, customisation coordination and export paperwork, and we plan shipments around your project phases or your regular replenishment cycle. Send us your market, target price level and delivery window, and we will map the supply chain behind your order.
Clear float, horizontal line wire and single-side flocked laminated glass all come from the same 10 + 2 mm (PVB/EVA) family, with the build matched to the privacy you need. As an aluminum glass room divider supplier we send the build reference with the quotation, so glass, frame finish and hardware are approved as one package rather than three separate decisions. Use clear float where the two spaces should stay visually connected, wire where a fine horizontal line and some screening are wanted, and flocked where the view through needs softening without losing daylight.
Two leaves suit a doorway-sized opening, where one panel parks behind the other. Four leaves close a wider span and stack into a shorter width at the end of the run. Most interior room divider doors are drawn as two- or four-leaf sets, and anything outside that is drawn to the opening. The practical limit is handling: each panel has to be narrow enough to lift and carry on site and wide enough to keep the frame count sensible.
Start from what is already on the floor. Black gives a drawn line against pale walls and ties to black window frames; champagne picks up brass, bronze and warm stone; grey sits back against concrete and cool neutrals; white disappears into white joinery and suits compact, light rooms; coffee works over walnut, teak and dark timber. Because a finish reads differently under showroom light, site light and daylight, approve a frame sample against the tile, paint or panel it will sit next to.
Wire carries a horizontal line embedded in the laminate, so you read a fine repeating grid across the panel and get partial screening while light still passes through. Flocked glass is treated on one side, which diffuses what is behind it and gives a softer, more even surface with no pattern. Both are used where interior glass partition doors need some separation without becoming a solid wall, and both are quoted by reference code so the same glass can be repeated on a later order.
Not necessarily. A flush floor track sits level with the tile, so there is no threshold to step over, and it is the usual choice for living areas. A surface-mounted track is simpler where the floor is already finished and cannot be opened up. Decide from the floor build-up rather than from a photograph: for wholesale sliding glass room dividers going into apartments with completed floors, the surface-mounted option is often the practical one. The track type is confirmed before production because it changes the panel height.
Measure the finished opening — after flooring and ceiling are in — across the width at the top, middle and bottom, and take the height at both ends. Work from the smallest figure in each direction, because a reveal is rarely perfectly square. Note where the head can take fixings, whether the floor is level along the run, and which end the panels will stack into. Interior partition doors are made to those figures, so a nominal size taken off a plan will not do.
Within what the model can support, yes. OEM aluminum room dividers are discussed per model: frame finish, glass build, panel sizes, panel arrangement and hardware can all be set to your specification. The file that comes out of that discussion — approved drawing, finish reference and glass code — is what repeat orders are produced against, so the first approval is worth taking seriously.