| Door Panel Material | High-quality Zinc Alloy Panel |
| Door Frame Material | Zinc Alloy Metal |
| Filling Material | Aluminum Honeycomb, Graphite Modifiied PU Form. |
| Sound insulation Feature | Excellent |
| Heat Insulation Feature | Excellent |
| Standard Overall Size | 880 × 2050 mm |
| Standard Sight Size | 760 ×1960mm |
| Standard Bottom Clearance Size | 40mm |
| Cutomize-Service | Customizable sizes are available |
| Color | Thermal Treasfering Printing, Colors are optional |
| FOB Guangzhou Port | US $ 50 /PC |
| Minimum Order Quantity | 800 PC |
| Indicative Delivery Time | 10-15 days |
Wholesale zinc alloy interior doors from Boniven are built around model HB2061, a single-leaf hinged door supplied as a complete set with its matching zinc alloy frame. The standard overall size is 880 × 2050 mm, the face is a high-quality zinc alloy panel, and the leaf core combines aluminium honeycomb with graphite-modified PU foam. It is the model we quote most often when a distributor wants one dependable room door to anchor a line, or when a contractor needs the same door repeated across every room of an apartment block or a hotel floor.
As a zinc alloy interior door supplier we work with importers, building material distributors, renovation contractors and developers rather than with single-unit buyers, and that shapes the product. The face is a metal panel rather than a timber skin, so every leaf in an order is produced to the same specification, with the same edge profile and the same printed pattern, and a replacement leaf ordered months later is made to that specification so the run you installed still reads as one scheme.
Day to day, a zinc alloy door behaves differently from a wood door. There is no grain to raise in humid weather, no sanding, sealing or refinishing to keep the face looking new, and no visible joint lines where stiles meet rails. In a rental block, a serviced apartment or a hotel guest floor, that means the doors still read as a matched set after years of opening, closing and cleaning — the wear that shows first on a painted timber leaf.
| Door Panel Material | High-quality Zinc Alloy Panel |
| Door Frame Material | Zinc Alloy Metal |
| Filling Material | Aluminum Honeycomb, Graphite Modifiied PU Form. |
| Sound Insulation | Excellent |
| Heat Insulation | Excellent |
| Standard Overall Size | 880 × 2050 mm |
| Standard Sight Size | 760 ×1960mm |
| Standard Bottom Clearance | 40 mm |
| Customization Service | Customizable sizes are available |
| Colour | Thermal transfer printing, colours are optional |
| FOB Guangzhou Port | US $ 50 /PC |
| Minimum Order Quantity | 800 PC |
| Indicative Delivery Time | 10-15 days |
The face is finished by thermal transfer printing, which bonds the pattern onto the panel surface instead of laying a loose film over it. The door photographed for this product carries a grey wood-grain pattern with a matt surface, framed in a matching grey and fitted with a black lever handle — a restrained combination that sits comfortably in living rooms, dining rooms and bedrooms decorated in neutral, Scandinavian or Japanese-influenced schemes.
Colours are optional. Because the pattern is transferred from a master, the grain repeat stays consistent from leaf to leaf across an order and does not wander the way a natural veneer can. Darker tones give a stronger contrast against pale walls and light floors; lighter greys and oaks keep a room calm. Send the flooring, joinery or wall swatch you are matching against and we will line the print run up to it.
For a distributor, the finish is usually what closes the sale. If you sell under your own label, oem zinc alloy room doors can be developed from this model, with the print, frame profile and packing brought into line with the rest of your catalogue. Modern interior doors are judged at arm's length, so it is worth seeing the finish in the hand before a container is committed.
| Door drawing (elevation and section) | Available for this model on request |
| Packing list | Issued with each order |
| Complete door weight and carton gross weight | Confirmed against your final configuration |
| Inner lining and corner protection | Confirmed in the packing specification |
| Container stacking arrangement | Planned with the loading plan |
| Test data sheet with test item, method and recorded result | Available from your sales contact |
| Loading quantity per container | Confirmed once sizes and packing are fixed |
The finish is already final. The face is thermally transfer printed, and that print is the finished surface for the whole life of the door. There is no oil, wax, varnish or polish stage, and nothing is sanded back later when the surface starts to look dull — a printed metal interior door simply needs to be kept clean. That matters most to whoever inherits the door, a hotel maintenance team or a landlord, because the budget line for redecorating timber doors does not exist here.
The routine is a wipe, not a treatment. A soft damp cloth with a little mild household detergent, then a dry cloth so no residue sits on the print. Keep water away from the bottom edge of the leaf and out of the frame rebate, which is where a mop is usually pushed hardest and where fluid works its way in. Abrasive pads, scouring cream, bleach-heavy products and solvent cleaners should never go on the face.
Hinges and locking. Doors settle in the first month after installation, so check the hinge screws and give any that have loosened a turn before handover. A hinge that starts to squeak wants a dry or silicone-based lubricant on the pin, never oil run down the face. If a latch begins to need a push to close, adjust the strike plate rather than the leaf.
On site during snagging. Leave the leaf in its protective wrapping until the room is finished. Adhesive tape, protective film and stickers left on a printed face in direct sun are the most common cause of a mark that will not lift, and painters' masking tape is the usual culprit.
Marks that will not come off. Warm water and patience lifts most scuffs. If a mark stays, speak to your sales contact about the leaf instead of attacking it with a stronger cleaner; on a matched run, a replacement leaf produced to the same print keeps the scheme intact in a way a local repair cannot. Hold one spare leaf and one frame set from each shipment on site for exactly that reason — a scuffed door in a hotel corridor is a small problem if a match is already in the store, and a large one if it is not.
Boniven is a China-based sourcing and export partner for building material buyers. We work with a network of more than 100 vetted manufacturers and suppliers, which lets you consolidate different categories into one order instead of managing several factories yourself. Our team handles supplier matching, specification checks, inspection before loading, customisation coordination and export paperwork, and we plan shipments around your project phases or your regular replenishment cycle. Send us your market, target price level and delivery window, and we will map the supply chain behind your order.
Both are listed as excellent because of the way the leaf is assembled rather than because of the panel alone: the aluminium honeycomb core holds the two faces apart, the graphite-modified PU foam fills the cells, and the frame closes against the leaf around the full perimeter. How quiet or how warm a room feels also depends on the frame being fitted square, the seal sitting evenly and the bottom clearance matching the floor. If a project needs the recorded figures rather than the feature description, ask your sales contact for the current test data sheet for this model — metal interior doors are often quoted on the material alone, and the numbers tell you more.
The door is quoted as a leaf and frame set, with hinge positions and lock preparation agreed at ordering. Handle and lock sets are selected with the order rather than assumed, because a project may want a lever handle, a privacy set or a keyed lock in the same finish as the frame. If you are developing oem zinc alloy room doors for your own catalogue, the hardware can be specified to the range you already sell, subject to the model's capabilities and the agreed quantity. Tell us what you want fitted and we will confirm what is standard and what is added.
Both are modern interior doors built on a zinc alloy leaf and frame, and both are ordered the same way. The noise-reduction bedroom door is put together around cutting everyday sound transfer between a bedroom and the rest of a home or hotel floor. This model is the standard door in the line — the one to hold across living areas, bedrooms, corridors and guest rooms where consistency matters more than a specialist build. Where a project has a few rooms that need the quieter door, the two can be mixed on the same order.
Keep interior room doors flat and off the floor on a dry surface, with the leaf still in its protective wrapping until the room is ready to hang it. Stack on the long edge only when the door is supported along its full length, and never stand one on a corner — that is where a frame and a printed face take damage first. Bring each door into the building a day or two before fitting so it settles at the same temperature and humidity as the wall it will hang in, and check the leaf for square before the frame is fixed.
Wipe with a soft damp cloth and a mild household detergent, then dry the face with a cloth so no residue sits on the print. Avoid abrasive pads, scouring cream, solvent-based cleaners and anything heavily bleached, and do not let cleaning fluid pool along the bottom edge of the leaf or in the frame rebate. Stubborn marks usually lift with warm water and a little patience; a printed surface does not need polish or wax at any point in its life.
This is an interior room door intended for dry rooms — bedrooms, living areas, corridors, offices and hotel guest rooms. For bathrooms, shower rooms and other wet areas we supply aluminium glass bathroom and washroom door lines instead, built around a frame and panel combination suited to humidity and frequent cleaning. Projects that need both usually buy the two lines from one zinc alloy interior door supplier so the frames, finishes and hardware read as a single scheme.