Door Leaf Options
Aluminum Frame Color Options
Outstanding Features
For B2B Supply
Model HB2330 belongs to a family of aluminum interior doors with glass, built as a side-hung interior door with an aluminum frame and a glass panel, and sized for bathrooms, en-suites and washroom entrances in houses, apartments, villas, hotels and light commercial interiors. The frame carries the door, the glass keeps the entrance bright, and the result reads as part of the room rather than a solid slab at the end of a corridor.
As an aluminum glass washroom door supplier, Boniven sells this door on its own against a project schedule and as part of a wider range for distributors building a bathroom door line. Buyers come to it for one of three reasons: the timber doors in a property are swelling and blistering in a wet room, a project needs one door specification repeated across many units, or a dealer wants a modern metal-and-glass entrance to sit alongside contemporary sanitaryware.
What it replaces is usually a solid timber or MDF bathroom door. Aluminum has no wood-based core to soak up moisture, so the frame does not depend on sealing every cut edge to stay stable in a room that is steamy most mornings. The glass does the rest of the work — it lets daylight from a bedroom or a hallway reach the washroom, which matters most in apartments where the bathroom has no window of its own.
Because this is a hinged glass door rather than a slider, the opening behaves exactly like a conventional side-hung interior door: same frame fixing, same swing, same sequence for the fitter. Nothing about the installation calls for a specialist crew, which is why renovation buyers can swap one in for a timber leaf without reworking the opening.
Choosing the glass
Frosted glass is the default for a washroom: it obscures a direct view through the panel while still passing daylight, so the room stays bright without being overlooked. On a bathroom door with glass panel the privacy comes entirely from the surface treatment, not from the frame, which is why the glass type is the decision to get right first. Fluted glass delivers the same effect with vertical reeding, and the texture breaks up shapes behind it more strongly than a flat frosted surface — it is the option that reads most clearly as a design decision in a contemporary scheme. Tempered glass is a strength treatment rather than a privacy level; a tempered panel can still be clear, so it is chosen alongside a privacy option rather than instead of one.
For most residential work the practical pairing is frosted or fluted glass in a frame colour that matches the fittings. Frosted glass interior doors for bathrooms work the same way in a hotel or an apartment block, with one advantage: a repeated glass type is far easier to reorder than a decorative one.
Choosing the frame colour
Five frame colours are produced: black, white, gray, coffee and champagne gold. Black suits industrial, marble and dark-fixture bathrooms and is the version shown here. White and gray stay quiet against neutral tile and are the easiest introduction in a market that has not used metal doors before. Coffee and champagne gold carry a warmer, more decorative look suited to hotel and villa interiors in some regions. Distributors who stock aluminum bathroom doors usually carry two or three of these in depth and keep the rest to order.
Confirming the combination
Frame colour and glass change each other. A light frame behind frosted glass gives a soft, quiet entrance; a black frame against the same glass gives a strong outline that becomes part of the room's detailing. Before a first order, judge the glass against a physical sample under the light the room will actually have, and check the frame colour against a tile or fitting sample rather than a screen.
| Model | HB2330 |
|---|---|
| Type | Hinged single-leaf interior door |
| Category | Aluminum interior doors with glass |
| Frame | Aluminum alloy |
| Glass panel | Frosted, fluted or tempered glass |
| Frame colours | Black, white, gray, coffee, champagne gold |
| Handle | Lever handle |
| Typical use | Bathrooms, en-suites and washroom entrances |
| Application | Homes, apartments, villas, hotels and commercial interiors |
| Custom options | Size, frame colour, glass style and hardware, subject to compatibility |
A door line lives or dies on repeatability. When a distributor reorders six months later, the second batch has to sit beside the first on a showroom wall without a visible difference in frame colour, glass tone or handle finish. As an aluminum glass washroom door supplier, Boniven works from an approved specification sheet for exactly that reason: frame colour, glass type, leaf size and hardware are written down and confirmed before the first production run, and that sheet becomes the reference for everything after it.
Three items are hardest to match by eye, and they are the three worth pinning down first: the frame colour across separate aluminum batches, the tone and texture of the frosted or fluted glass, and the handle finish. Send a named colour reference or a physical sample for each, and keep the approved samples until the line is retired.
For a new distributor stocking aluminum bathroom doors, the usual route is to start narrow. Two or three frame colours carried in depth, with frosted glass as the standard privacy option and fluted or tempered offered to order, gives a dealer enough to show without tying up capital in a long list of variants. A short range with a locked specification is also much easier to reorder than a wide one where every unit is slightly different.
Project buyers work the same way at a different scale: one approved door repeated across a hotel floor or a residential block, with later phases matched to the first delivery rather than re-specified. That is ultimately what wholesale aluminum washroom doors are judged on — whether the second batch looks like the first. Keep the approved sheet and one retained sample from the opening delivery, and that pair settles almost every question that comes up on a phase-two order.
A washroom door rarely travels alone. Dealers who take this model usually pair it with a privacy glass bathroom door for bathrooms where the glass is the whole design statement, and with an aluminum glass room divider for open-plan living areas where a fixed wall would cost too much light. Both use the same aluminum-and-glass language, so a showroom wall built from them reads as one range rather than three unrelated products.
The other half of an interior door order is usually solid. For bedrooms, studies and living spaces, wholesale zinc alloy interior doors cover the rooms where glass is the wrong choice — a metal door with a defined profile and a coordinated finish, matched to the same interior scheme as the bathroom doors.
Ordering across the lines is mostly a matter of keeping the finish references together. Frame colours, handle finishes and glass tones chosen once will carry across the aluminum doors and the partition, so a buyer does not end up with three slightly different blacks inside the same building.
For buyers running their own brand, oem aluminum washroom doors and the other lines in this group can be planned to a single brand reference, so a private-label catalogue looks like a catalogue rather than a series of one-off orders.
Boniven is a China-based sourcing and export partner for building material buyers. We work with a network of more than 100 vetted manufacturers and suppliers, which lets you consolidate different categories into one order instead of managing several factories yourself. Our team handles supplier matching, specification checks, inspection before loading, customisation coordination and export paperwork, and we plan shipments around your project phases or your regular replenishment cycle. Send us your market, target price level and delivery window, and we will map the supply chain behind your order.
Frosted is the safe default for a washroom: it blocks a direct view while letting daylight through. Fluted does the same job with a vertical reeded texture that hides shapes more strongly and gives the door a more decorative face. Tempered glass is a strength treatment, not a privacy level — a tempered panel can still be clear, so specify it in addition to frosted or fluted glass rather than instead of one of them.
It removes a clear view through the door, but it is not an opaque panel — light passes, and shapes may still be readable depending on the glass type and the lighting on either side. Frosted glass interior doors for bathrooms are normally specified so the room behind reads as a soft glow rather than a room you can see into. Judge the effect under the lighting the bathroom will actually have, because a bright room on one side changes how much shows through.
Yes — this is the environment the door is built for. The frame is aluminum rather than a wood-based core, so it does not swell at the edges the way a timber door can in a steamy room, and the glass is set into the frame instead of being fixed to a surface. Ventilate the bathroom as you would with any door, and wipe the frame dry after cleaning so water does not sit on the finish.
Yes. Dimensions can follow a project drawing or a measured opening rather than a catalogue size, which is what most renovation and multi-unit buyers need. Send the opening width, height and wall thickness, and state which side the door should hinge on and which way it should swing, so the drawing is checked before production starts.
This hinged glass door is supplied with a lever handle and the hinges for its configuration; the version shown carries a black lever on a matte black frame. Handle style and finish can be set for the order, subject to compatibility with the frame preparation, so confirm the pairing when the specification is agreed rather than after production.
Wipe the frame with a soft cloth and a mild soap solution, then dry it — standing water is what dulls a matte finish over time. Clean the glass with a normal glass cleaner and a soft cloth or squeegee, and avoid scouring pads, abrasive cream and anything with a coarse grit, which will scratch both the glass and the frame. In a bathroom used daily, a quick wipe of the handle and the frame edges once a week is enough to keep the finish looking new.