• HB2323,MY SHOP,HB2323
  • HB2323,MY SHOP,HB2323
  • HB2323,MY SHOP,HB2323
  • HB2323,MY SHOP,HB2323
  • HB2323,MY SHOP,HB2323
  • HB2323,MY SHOP,HB2323
  • HB2323,MY SHOP,HB2323
  • HB2323,MY SHOP,HB2323
  • HB2323,MY SHOP,HB2323
  • HB2323,MY SHOP,HB2323

Aluminum Frosted Glass Bathroom Door

No.HB2323
The Aluminum Frosted Glass Bathroom Door is designed for interior bathroom spaces where visual privacy and a softer glass appearance are important parts of the door specification. Combining an aluminum alloy structure with frosted glass, it provides a balanced solution for bathrooms that need separation from adjacent rooms without creating the heavy appearance of a fully solid door.

Door Leaf Options

  • Frosted Glass
  • Fluted Glass
  • Tempered Glass 

Aluminum Frame Color Options
  • Black Color
  • White Color
  • Gray Color
  • Coffee Color
  • Chanpagne Color (Golden) 

Outstanding Features
  • Privacy Protection
  • Moisture Proofing
  • Low- Maintenance
  • Modern
  • Luxury 
  • Long Life Span

For B2B Supply
  • Minimum Order Quantity: 800 PCs
  • Indicated Lead Time: 10-15 Days
  • OEM/ ODM Service 
Download
View all downloads

Description

Product Overview

The aluminum frosted glass bathroom door, model HB2323, is a hinged interior door built around a single frosted glass panel held in an aluminum alloy frame. The frosted surface blocks a clear line of sight into the bathroom while daylight still passes through the panel, so the entrance reads lighter than a solid timber door and the room behind it does not depend on artificial light during the day.

As an aluminum glass washroom door supplier we work with distributors, contractors, developers and interior designers on houses, villas, apartments, hotels and serviced residences. Buyers usually arrive with one of two jobs in hand: adding a glass bathroom door to a catalog and needing a specification that repeats order after order, or fitting out a building where every bathroom opening has to look the same. Both run on the same leaf — the frame color, glass treatment, size and hardware change to suit the room.

Day to day it behaves like any hinged interior door: a lever handle, a standard lock and hinges set up for a glass-and-aluminum leaf. It takes the place of a solid wooden bathroom door in the same opening, with the frame produced to the dimensions you measure on site and the panel set to the privacy level you approve.

Frosted Glass and Privacy

  • How the privacy works: the frosting diffuses the panel, so someone standing outside cannot make out detail on the other side, while light still travels through. That combination is why frosted glass interior doors for bathrooms are chosen wherever a clear panel would expose the room.
  • Privacy has a range, not a switch: how much is visible depends on the glass treatment, the light level on each side and how close the viewer stands. A brightly lit bathroom facing a dim corridor shows more than the reverse, so judge the sample under your own lighting.
  • Glass options: the leaf can be ordered with frosted glass, fluted glass with a vertical ribbed texture, or tempered glass for the panel itself. Each treatment changes the character of the door as much as the privacy level.
  • Surface character: a frosted face scatters light instead of reflecting it, which is why the door sits quietly beside tiles and stone rather than adding another shiny surface to a small room.
  • The panel shown: photographs of this model carry a white swan and floating feather motif on the frosted panel. Tell us whether the panel should stay plain or keep artwork, and it is set at the specification stage.
  • Confirm before the specification is frozen: a screen cannot show how a glass treatment behaves in your room. Ask your sales contact about a glass sample, especially where several bathrooms in one building have to match.
  • Consistency across a project: when the same frosted treatment is used on every bathroom door of a hotel floor or an apartment block, corridors and elevations stay visually consistent from the first unit to the last.

Material and Build

The frame is aluminum alloy and runs the full perimeter of the leaf, holding the glass panel and giving the door its edge. Unlike a wood-based door it has no timber core that swells when a bathroom is used hard, which is why the material is common in rooms with running showers, steam and frequent washing down.

The panel is set into that frame, and the glass type, thickness and treatment are fixed together at specification stage. A tempered panel or a different surface treatment changes what the frame has to carry and how the leaf balances, so the two are never chosen separately.

What decides how the door feels in use is the whole build-up: leaf, frame, hinges, lock and the sealing components that sit around the perimeter. Two doors sold as aluminum and glass can close very differently if the hinge set or the sealing differs, so it is worth checking the full assembly rather than the material line alone.

Compared with other aluminum interior doors with glass in our range, this one is specified around the bathroom — a privacy panel rather than a clear one, and hardware chosen for a small, wet, frequently cleaned room.

A bathroom is exposed to humidity and cleaning products, and the finish on the frame is what keeps the door looking right over time. Ventilation in the room, the condition of the surrounding wall and the quality of the installation all affect long-term performance, so the door should be treated as a fitted product rather than a panel dropped into a hole.

Frame Finish and Hardware

  • Light versus dark: a light finish lets the entrance recede and keeps a small bathroom calm, while a darker finish draws a stronger line against pale tile and stone. The same door reads very differently across those two choices.
  • Match the metalwork: choose the frame against the taps, shower fittings, mirror frame and vanity hardware. One sample board with the tile and the tap finish in the same hand beats comparing photographs.
  • Match the tile: in a room of large-format marble or concrete-look porcelain, the frame is often the only strong line at eye level, so the color is felt more than it would be in a busy scheme.
  • Repeat consistency: finish is the part buyers most often see drift between shipments. It is written into the specification with the color reference so the second and third deliveries match the first.
  • Handles and locks: lever handles and locks are selected with the door; the handle shown on this model is a black lever.
  • Hinges and handing: hinge configuration and left- or right-hand opening are fixed per opening, so list them with the dimensions rather than leaving them to site.
  • Own-brand lines: for an OEM aluminum washroom door line, the frame color and hardware set are locked while the sizes change by market, which keeps a distributor's catalog coherent across countries.

Specifications

PropertySpecification
ModelHB2323
Door typeHinged interior bathroom door, single glass panel
Frame materialAluminum alloy
Glass optionsFrosted, fluted, tempered
Frame colorsBlack, white, gray, coffee, champagne gold
PanelOne full-height glass panel
HandleLever handle, black finish shown
HardwareHandle, lock, hinges, sealing components
SizesProduced to project door width and height
Glass thicknessFixed together with the glass specification
Opening directionLeft or right hand, set per opening
Typical useBathrooms, en-suites, hotel guest rooms, apartments

Applications

  • Master bathrooms and en-suites: the door usually faces the bedroom, so the frosted panel protects the sightline while daylight from the bedroom side still reaches the room. A bathroom door with glass panel keeps a compact en-suite from feeling boxed in.
  • Guest and family bathrooms: these open onto hallways and landings where traffic passes all day, and the diffused panel keeps the room private without turning the corridor wall into a run of solid doors.
  • Villas and houses with several bathrooms: the same design runs across every bathroom while the widths follow each opening, so the house reads as one scheme rather than a series of unrelated doors.
  • Apartments and multi-unit developments: one specification repeats across units and the dimension is adjusted per layout, which keeps the interior package consistent for the developer and simple for the contractor to install.
  • Hotels, resorts and serviced residences: guest bathrooms need privacy with a contemporary look that suits the room design, and the same door can be repeated floor by floor against a room schedule.
  • Rental properties and renovation work: the door replaces a solid timber bathroom door without changing the character of the room, and existing openings can be measured before production so the new leaf fits the old wall.

Opening Measurement and Fitting

  1. Measure the finished opening — width, height and wall thickness — after the wall finish is in place, and note the floor build-up so the leaf clears the finished tile.
  2. Record the handing for each opening: which side the hinges sit on and which way the leaf swings into the room.
  3. For renovation work, measure the existing opening before production starts; old openings are rarely square, and a frame made to a nominal size will not close the gap.
  4. Send the dimensions and a simple sketch. A wholesale aluminum washroom door order rarely repeats one size, so list each opening separately by room number or unit type.
  5. Set the frame plumb and level, pack it and fix it before the leaf goes on; a frame that is out of true will show up as a gap on the lock side.
  6. Hang the leaf, check the gap around the perimeter, and adjust the hinges rather than trimming anything.
  7. Fit the handle and lock, confirm the latch closes cleanly against the strike, then seal the frame to the wall and leave the room ventilating.

Care and Maintenance

The frosted face is the part that shows wear first. Wipe it with a soft cloth and a mild detergent, then dry it, and keep abrasive pads and scouring powders away from the panel — a diffused surface marks more visibly than clear glass and cannot be polished back. Bathroom descalers and strong acidic or alkaline cleaners should be kept off the aluminum frame as well; apply them to the tile, rinse, and wipe the frame down afterwards rather than leaving them to sit.

Hinges carry a glass-and-aluminum leaf and stay smooth only if they are checked. Every few months, tighten the hinge screws, look for movement at the frame, and check the lock and handle fixings. The seal between frame and wall is worth the same attention: once it dries out or lifts, water finds its way behind the frame.

The door should not be treated as maintenance-free. Regular cleaning, a working extractor fan and a habit of leaving the bathroom ventilated after use do more for its long-term condition than any single product, and a door that is never left wet will keep its finish far longer.

Ordering and Delivery

  • Minimum order quantity: 800 pcs for this door.
  • Indicated lead time: 10-15 days.
  • Pricing basis: each wholesale aluminum washroom door order is quoted per piece, with tiers by loading volume — a full 20GP, a full 40HQ and smaller quantities are priced on different tiers. Ask for the tier that matches your plan and we will quote against it.
  • Weight: net and gross weight are stated separately for the door leaf and for the frame, on the packing list drawn up for your size. Request it with the quotation so freight can be calculated correctly.
  • Drawings and packing list: the door drawing and the packing list are available as downloadable files issued with the quotation.
  • Packing: doors are packed with protective inner lining and corner guards. Ask our team to confirm the packing method and the number of stack layers used for your door size and container type before the order is closed.
  • What can be adjusted before production: door width and height, aluminum frame configuration, frosted glass specification, matte options, glass thickness and treatment, color and finish, handle and lock, hinge configuration, opening direction, sealing components, packaging requirements and bulk project quantities.
  • Own-brand supply: an OEM aluminum washroom door program can carry your own packaging and hardware set, so the door arrives ready for your catalog.
  • Payment terms, trade terms and destination port: confirmed with your sales contact for each order, together with the export documents for the shipment.

Complete Door Range

The frosted bathroom door is one leaf in a wider interior door range, and most buyers take it as part of a package rather than on its own. Alongside it sit the privacy glass bathroom door, the aluminum glass washroom door, the aluminum glass room divider used where a shower or a change of zone needs screening, and the zinc alloy interior doors that cover bedrooms and living areas.

The reason to buy them together is color continuity. The same frame colors run across our aluminum interior doors with glass, so the bathroom door, the divider and the bedroom door can share a finish and the finished building reads as one scheme rather than three separate purchases.

Most of our buyers want one aluminum glass washroom door supplier for the whole project, so the doors, the partitions and the bathroom fittings are quoted on one set of documents and consolidated onto one loading plan.

For a distributor building the line, the practical route is to fix the frosted treatment and the hardware set first and let sizes follow the market — one country may work to narrower openings than another, and the specification holds while the dimensions move.

Supply Chain & Delivery Assurance

Boniven is a China-based sourcing and export partner for building material buyers. We work with a network of more than 100 vetted manufacturers and suppliers, which lets you consolidate different categories into one order instead of managing several factories yourself. Our team handles supplier matching, specification checks, inspection before loading, customisation coordination and export paperwork, and we plan shipments around your project phases or your regular replenishment cycle. Send us your market, target price level and delivery window, and we will map the supply chain behind your order.

FAQ

Q1. Does frosted glass provide bathroom privacy?

Yes. Frosting diffuses the panel so a person outside cannot make out detail inside, while light still passes through — that balance is the main reason frosted glass interior doors for bathrooms are specified instead of clear glass. How much is visible depends on the glass treatment and the lighting on each side, so the level is confirmed against a sample before the order is fixed.

Q2. Can the aluminum frame color be customized?

Yes. The frame color is selected against the project from the standard finish range and confirmed on a sample before production. On an OEM aluminum washroom door run, the chosen color is locked into the specification so repeat orders come back matching.

Q3. Is matte glass the same as frosted glass?

The two words are used loosely for the same diffused, low-reflection appearance, and both turn up in specifications for frosted glass interior doors for bathrooms. The precise surface treatment is set by the glass specification you approve, so the wording on the drawing and the approved sample should match before production starts.

Q4. Can this door be used in hotels?

Yes. Hotel guest rooms, suites, resorts and serviced residences are routine applications — the door gives a guest bathroom a private but daylit entrance that suits contemporary room design. Larger projects repeat one specification across rooms, with dimensions and handing taken from the room schedule, which is how hospitality buyers specify aluminum interior doors with glass floor by floor rather than door by door.

Q5. Can different bathroom door sizes be supplied in one project?

Yes. A single wholesale aluminum washroom door order can carry several sizes: list the openings by room number or unit type, and the frame and leaf are produced to each dimension while the glass, finish and hardware stay the same across the project.

Q6. Can distributors order these doors in bulk?

Yes. Bulk orders are organized by dimension, glass specification, finish, hardware and quantity, then split by room type, building or construction phase. Distributors stocking the line usually fix the frosted treatment and the hardware set first and let sizes follow the market. As an aluminum glass washroom door supplier we issue the drawing and packing list against the confirmed schedule.

Q7. What hardware comes with the door?

The bathroom door with glass panel is supplied as a set: leaf, frame, lever handle and lock, hinges and the sealing components that belong to the frame. The handle shown on this model is a black lever; other handle and lock styles are selected with the door so the metalwork matches the frame.

Q8. Can the door be supplied with tempered glass instead?

Yes. Tempered glass is one of the panel options alongside frosted and fluted glass, and the bathroom door with glass panel can be ordered with it where the project calls for it. Glass type, thickness and treatment are written into the specification together, because they are chosen as one set rather than separately.