Wholesale Washroom Door Sourcing Guide

Aluminum Glass Washroom Door Supplier

Wholesale Washroom Door Sourcing Guide

This page is written for importers, distributors and main contractors who are shortlisting an aluminum glass washroom door supplier and need to know what the order actually contains before a purchase order goes out. Model HB2330 is a hinged interior door with an aluminum frame and a glass panel, quoted at $25.00–$100.00 with an 800-set minimum and a 10–15 day lead time. Use the sections below to plan wholesale aluminum washroom doors across hotel, apartment or commercial restroom projects, from configuration choices through pre-shipment inspection.

Aluminum glass washroom door with black aluminum frame and frosted glass panel

Order-line baseline

Order-Line Snapshot: HB2330

One model, one construction. Establish the physical build first, because every commercial question later in this guide refers back to these details.

Modern aluminum glass washroom door installed in a contemporary bathroom
Door type
Side-hung (hinged) interior door
Frame
Aluminum, assembled as a closed rectangle around the panel
Panel
Glass, held inside the frame rather than fixed to a face
Core
No wood-based core in the leaf
Handle
Black lever handle, as shown
Finish as shown
Matte black on frame and handle
Sealing points
Glass-to-frame joint and leaf-to-opening fit
Installation
Same fixing, swing and fitter sequence as a conventional side-hung interior door

Why the build matters for a buyer: because the glass sits inside the frame and the leaf carries no wood-based core, the door does not rely on sealing every cut edge to survive a wet room. The geometric black line across the glass is a design detail, not a structural element — treat it as an optional visual and not as part of the performance specification.

Commercial frame

Price & MOQ Reality Check

Three numbers are published for HB2330. Everything else in the commercial conversation has to be settled in writing with your supplier.

Black aluminum frame detail of a glass washroom door for interior applications
Item Stated on the product page What your quote must confirm
Unit price $25.00 – $100.00 Which glass option, frame colour, hardware and packing sit inside your band
Minimum order 800 Sets / 800 PCs Whether the 800 sets run as one configuration or split across colours and glass types
Lead time 10–15 Days (indicative) When the clock starts — sample approval, deposit or PO date — plus documentation time
Customization OEM / ODM service offered What is in scope for your brand, and how it affects MOQ or lead time

Reading the price band: a single model quoted across a $25.00–$100.00 range is telling you the spread comes from configuration, not from model choice. Glass type, frame colour, hardware, export packing and how the order is split across lines are the levers worth arguing over in the quotation stage — not the headline number.

Building the order lines

Configuration Matrix for Order Lines

Each of these choices creates a separate order line inside the 800-set run. Decide them before you ask for a price, not after.

Frosted glass panel for an aluminum framed washroom door with added visual privacy
Glass

Frosted / Fluted / Tempered

All three glass options are listed for this door. Frosted controls visibility, fluted adds a textured screen while still transmitting daylight, tempered is the option to discuss where impact resistance is specified.

Buyer decisionPick one glass type per order line and state it as a written line item.
Frame colour

Five colours produced

Black, white, gray, coffee and champagne (golden). Five is a genuine range rather than a single sample colour, so a mixed-colour project is a planning exercise, not a special request.

Buyer decisionMatch the frame family to the project's joinery before you split the run.
Finish

Matte black, as shown

The photographed sample carries a matte face on frame and handle. A matte surface hides fingermarks and dried water spots better than a high-gloss face in daily washroom use.

Buyer decisionWrite the finish into the specification so a gloss substitution is a variation.
Hardware

Black lever handle

A lever handle is operated with a downward push, which the product page positions as easier with a wet or occupied hand than a round knob.

Buyer decisionConfirm handle finish and side of fitting per leaf before production.
Build

Hinged aluminum + glass

Side-hung construction with an aluminum frame and a glass panel seated inside the frame. No wood-based core, so the leaf is not dependent on edge sealing.

Buyer decisionCheck the opening's swing and frame fixing match a standard side-hung fit.
Aesthetic

Geometric line detail

The sample shows a black line pattern across the glass. It is a decorative detail and can be treated as a design option rather than a performance feature.

Buyer decisionDecide patterned or plain glass per floor or per project tier.

Inspection criteria

Supplier Vetting Checklist

Six points that separate an acceptable HB2330 batch from a batch you will be reworking on site. Use them as pass/fail criteria at sample approval and again at pre-shipment.

Wholesale aluminum washroom doors for building material distributors and contractors
  • 1

    Frame joint alignment

    Pass: corners meet with no step or gap, and the door face reads as one continuous line. Fail: visible offset at any corner.

  • 2

    Glass seated inside the frame

    Pass: the panel sits within the frame rebate and keeps the leaf rigid when pushed. Fail: a panel applied to the face instead of set into the frame.

  • 3

    Hinge and lever QC

    Pass: every leaf swings freely, the lever returns cleanly and there is no play at the hinge. Fail: drop or bind at the hinge, loose lever.

  • 4

    Core material

    Pass: no wood-based core in the leaf, so moisture absorption and cut-edge sealing are not the failure mode. Fail: any timber-based infill.

  • 5

    Sealing at both interfaces

    Pass: the glass-to-frame joint and the fit of the leaf against the opening are both closed. Fail: open gaps at either interface.

  • 6

    Export packing

    Pass: frame corners, frame faces and glass are individually protected and each set is labelled for split delivery. Fail: sets loose in a crate without corner protection.

Risk reduction

Sample / Trial Order Path

An 800-set minimum is a hard commitment. Work through these four steps before that commitment is made.

Confirm sample or trial availability

Sample and trial-order terms are not published on the product page, so ask directly. Get the answer in writing alongside your quotation request.

Approve glass, frame colour and hardware on the sample

These are the three choices that move both the price band and the appearance of the installed door. Sign off all three on a physical sample.

Define the OEM/ODM scope

The page states an OEM/ODM service is offered. Fix in writing what changes for your brand, what stays standard, and how that affects the 800-set minimum.

Convert to PO with the sample as reference

Keep the approved sample and its signed specification as the benchmark for the pre-shipment inspection instead of relying on a written description alone.

Why this order

The sample is the cheapest quality gate you will buy

A 10–15 day indicative lead time is short, which is useful — but it also means a production error surfaces close to the shipment date. Approving glass type, frame colour and hardware on a sample first keeps the corrected version inside the timeline instead of after it.

If a sample is not offered, ask for a trial quantity or a pre-production approval photo set of the first finished leaf, and make that a written condition of the PO.

Buyer decision Do not release an 800-set order until the glass, frame colour and handle are approved in a physical or photographic form.

Sequence and handoffs

Order-to-Delivery Timeline

The published 10–15 day lead time is indicative. Read it against this sequence so you know which handoff starts the clock and which ones sit outside it.

  • Step 1

    Brief

    Quantity, glass type, frame colour, hardware and destination fixed in one document.

  • Step 2

    Approval

    Sample or photographic sign-off, if offered, before any production slot is booked.

  • Step 3

    PO released

    Order lines, price band, packing instructions and delivery terms confirmed in writing.

  • Step 4

    Production

    Frame, glass, handle and finish built to the approved configuration.

  • Step 5

    QC & packing

    Vetting checklist applied, then sets packed and labelled for export.

  • Step 6

    10–15 days & handover

    Indicative lead time, followed by export documentation and shipment handover.

Scenario to specification

Match the Door to the Project

The same model serves four very different buying situations. Each one below pairs a project scenario with a confirmed product fact and the decision it should trigger.

Hotel washroom refurbishment

Product fact: five frame colours are produced and three glass options are listed, inside a single 800-set run.

Buyer decision: standardise one glass and one frame colour for standard floors, and reserve champagne (golden) frames or patterned glass for executive floors — but confirm the split terms before quoting your client.

Apartment bathrooms

Product fact: the glass panel lets daylight from a bedroom or hallway reach the washroom, and frosted glass is listed as an order option.

Buyer decision: specify frosted glass where full visual privacy is required and fluted glass where daylight should still pass through — and hold one choice per apartment type.

Villas and high-spec residential

Product fact: the photographed sample uses a matte black frame and handle with a geometric black line across the glass.

Buyer decision: treat the line pattern as a design upgrade and confirm matte rather than gloss, since a matte face hides fingermarks and dried water spots better.

Commercial restroom projects

Product fact: tempered glass is offered, the leaf has no wood-based core, and the hardware is a lever handle.

Buyer decision: select tempered glass where impact resistance is specified, keep the lever handle for high-traffic openings, and put the two sealing points on the site handover checklist.

Request for Quotation: What to Send

One complete brief shortens the quotation cycle and reduces the chance of a price that has to be revised later. Include these six points in your first message:

  • Quantity in sets, against the 800-set minimum order
  • Glass option — frosted, fluted or tempered
  • Frame colour — black, white, gray, coffee or champagne (golden)
  • Handle and finish requirements for each order line
  • Project type and destination port or city
  • OEM/ODM requirement and requested packaging

Quotation outputs to expect

A complete reply should return the unit price inside the $25.00–$100.00 band for your chosen configuration, the MOQ confirmation for a split or single order line, and an indicative 10–15 day lead time with the start date defined.

Ask for the OEM/ODM scope in the same reply if you are buying under your own brand.

Related Reading

Three notes to help clarify product requirements before contacting the supplier.

Hinged Single-Leaf Aluminum Doors in Apartment Bathrooms

In a compact apartment bathroom, a hinged single-leaf aluminum door works best when its swing, doorway, and daily use are understood as one layout decision.

Read article

Frosted and Fluted Glass for Bathroom Door Privacy and Light

Frosted and fluted glass both blur what sits behind a bathroom door, but they scatter light in different ways that change how private and how bright the room feels.

Read article

Why Do Aluminum Frames Resist Swelling in Wet Bathrooms?

Aluminum frames resist bathroom swelling because the metal itself has no wood fibers to absorb water, while wood-based doors swell when moisture enters their fiber structure.

Read article

Frequently Asked Questions

What information is shown for this product?

Review the product details, images, and specifications presented on the official product page.

Where can i check the intended application?

Use the application and use-case information published on the official product page.

Which specifications should i confirm before ordering?

Confirm the specifications and options listed for the exact product variant before placing an order.

Where can i check available options?

Check the official product page or ask the supplier about options shown for the selected product.

How can i request product information?

Use the official contact or inquiry path provided on the site.

What should i include in an inquiry?

Include the product page, intended use, required quantity, and any specifications you need the supplier to review.