| Door Panel Material | High- quality Zinc Alloy Panel |
| Door Frame Material | Alluminum Profile |
| Filling Material | Aluminum Honeycomb, Graphite Modifiied PU Form. |
| Sound insulation Feature | Excellent |
| Heat Insulation Feature | Excellent |
| Standard Overall Size | 880 × 2050 mm |
| Standard Sight Size | 760 ×1960mm |
| Standard Bottom Clearance Size | 40mm |
| Cutomize Service | Customizable sizes are available |
| Color | Thermal Transfering Printing, Colors are optional |
| FOB Guangzhou Port | US $62/ PC |
| Minimum Order Quantity | 800 PC |
| Time Of Delivery | 10~15 Days |
Bedrooms are where noise is least welcome, and the doorway is usually the weakest point in the wall. This zinc alloy noise-reducing bedroom door is built for exactly that opening: a private room on one side, a hallway, living area or neighbouring room on the other.
The leaf is a high-quality zinc alloy panel carried on an aluminium profile frame and filled with aluminium honeycomb and graphite modified PU foam. That build gives the door a solid, flat face and a consistent feel in the hand — the qualities a sound insulating bedroom door depends on and a hollow-core timber door usually lacks. As a zinc alloy interior door supplier working with distributors, contractors and hotel project buyers, we supply the leaf and frame as a matched set rather than two separate parts.
The face is finished by thermal transfer printing. That is how the light oak wood-grain look in our photographs is produced on a metal panel, and why the same door can be supplied in other colours without changing its construction. The door shown carries an arched upper panel, a rectangular lower panel and a black lever handle, so it reads as a designed interior door rather than a plain slab.
You would specify it wherever a standard bedroom door is being chosen today: apartment and villa bedrooms, hotel guest rooms and serviced apartments, and replacements in renovation work. It sits in our modern interior doors range alongside aluminium glass washroom doors, privacy glass bathroom doors and aluminium glass room dividers, so a project can source several door types from one place.
Three parts decide how this door behaves in a bedroom: the panel, the frame and the core between them.
The panel is a high-quality zinc alloy sheet finished by thermal transfer printing. Metal interior room doors live or die on that surface: it has to take the knocks of daily use in a hallway or a rental flat, hold its colour and wipe clean without a repainting cycle. Printing the finish also means the same panel can carry a wood-grain effect such as the light oak shown, or a solid colour, so a metal leaf does not have to look like a metal leaf.
The frame is an aluminium profile rather than timber. It holds its shape, does not swell with the humidity swings that affect wooden frames in some climates, and keeps the leaf sitting square in the opening through years of closing.
Inside the leaf, aluminium honeycomb gives the door a flat, stiff structure, and graphite modified PU foam fills the cells. Together they add the mass and damping a hollow door lacks, and they are why this model is specified for both sound insulation and heat insulation.
The visible design uses an arched recessed panel above a rectangular one, with a black lever handle in the photographs. Hinges, lock and handle are chosen per model, and it is worth choosing them at the same time as the face: the handle and the door are seen together every day.
| Item | Specification |
|---|---|
| Product | Zinc Alloy Noise-Reducing Bedroom Door (HB048), interior room door |
| Material | Zinc alloy |
| Door panel material | High- quality Zinc Alloy Panel |
| Door frame material | Alluminum Profile |
| Filling material | Aluminum Honeycomb, Graphite Modifiied PU Form. |
| Construction | Zinc alloy door structure |
| Application | Interior bedrooms and private rooms |
| Standard overall size | 880 × 2050 mm |
| Standard sight size | 760 ×1960mm |
| Standard bottom clearance | 40 mm |
| Colour | Thermal transfer printing, colours optional |
| Surface finish | Available according to model |
| Sound insulation feature | Excellent |
| Heat insulation feature | Excellent |
| Acoustic performance | Subject to product specifications and testing |
| Customization | Customizable sizes are available |
Door sizes are only confusing until you separate the three figures involved. The overall size is measured across the outside of the frame, and that is the figure that has to suit the opening in your wall. The sight size is what you see of the leaf when the door is closed. The structural opening is the rough gap in the masonry or stud wall, and it is the one to measure on site, because it is the only figure that reflects the building you actually have.
Measure the width at the top, middle and bottom of the opening and the height at both sides. Older buildings are rarely plumb, and the smallest reading is the one that decides the order. Note the wall thickness at several points as well, especially where a plaster finish is still to go on. If screed, tiles or timber flooring are still to come, tell us the finished floor level — the leaf height and the clearance under it need to reflect the finished floor, not the bare slab.
Standard sizes suit most apartment and hotel layouts. Where an opening is unusual, a wall is thicker than standard, or a project wants a consistent head height across a floor, sizes can be customized; send the schedule and we will mark up what changes.
Two details are worth settling before production: the swing direction and which side the handle sits on. On interior room doors in refurbishment work it is also worth confirming how the frame will be fixed, since a stud partition and a block wall take different fixings.
Zinc alloy with a printed face needs very little beyond routine housekeeping. Wipe it with a soft, damp cloth and a mild detergent, then dry it with a clean cloth; that lifts fingerprints and corridor dust without touching the print. Abrasive pads, scouring cream and solvent cleaners can dull the grain or leave a patch that shows under raking light, so keep them off the face.
The parts that do wear are the moving ones. Check the hinges twice a year and tighten the screws holding them — a hinge that has worked loose lets the leaf drop and the perimeter gap open up, which is exactly what you do not want on a quiet door. Look at the seals at the same time, and replace any that are compressed or torn rather than leaving them in place; a seal that no longer touches the frame is doing nothing.
In hotels, serviced apartments and rental blocks, the maintenance that matters is usually hardware, not the surface. A short inspection between tenancies catches loose handles and tired hinges before a guest notices them. If a leaf is badly damaged in service, ask us what can be supplied as a matching replacement rather than trying to refinish a printed face on site.
Boniven is a China-based sourcing and export partner for building material buyers. We work with a network of more than 100 vetted manufacturers and suppliers, which lets you consolidate different categories into one order instead of managing several factories yourself. Our team handles supplier matching, specification checks, inspection before loading, customisation coordination and export paperwork, and we plan shipments around your project phases or your regular replenishment cycle. Send us your market, target price level and delivery window, and we will map the supply chain behind your order.
It is an interior bedroom door built around a zinc alloy panel on an aluminium profile frame, with a core of aluminium honeycomb and graphite modified PU foam. The construction targets bedrooms and other private rooms, where the door separates a quiet space from a busier one, and the face is finished by thermal transfer printing so the same door can be supplied in wood-grain or solid colours.
Buyers come to us as a zinc alloy interior door supplier for three practical reasons: the leaf is solid and flat rather than hollow, so the doorway stops behaving like a drum; the printed metal face does not need repainting and holds its appearance through rental and hotel use; and the leaf and frame are specified as a matched set, which is what makes a doorway quiet in practice rather than on paper.
No interior door can. Sound arrives around the door as well as through it — under the leaf, at the edges, at the frame-to-wall joint and through the surrounding construction. What this door gives you is a solid filled leaf, a matched frame and seals, and it reduces everyday transmission noticeably when the gaps are controlled at installation. Treat soundproof as trade shorthand, never as a promise of silence.
A regular bedroom door, including most timber and light metal interior doors, is usually chosen for appearance and price, and many are hollow or lightly cored. A sound insulating bedroom door is specified as an assembly: a filled core for mass and damping, a frame that fits the leaf closely, seals at the perimeter and a controlled gap at the floor. The difference is heard in use, and installation decides how much of the design actually reaches the room.
In any bedroom where the door separates a quiet space from a busy one: houses, apartments, villas, hotel guest rooms and serviced apartments, and it works equally well on home offices and study rooms. It is an interior door, so it is not intended for exterior openings or as a wet-area bathroom door.
Yes — guest rooms are one of the most common uses. Hotel work usually needs a repeatable specification: same leaf, same finish and same hardware across floors, packing that survives sea freight, and a delivery plan phased to the fit-out programme. Send the room count and the phasing with your enquiry and the quotation can follow that schedule.
Zinc alloy gives the leaf a dense, rigid panel, but no single material insulates on its own. What counts is the assembly: the honeycomb and foam core, the fit between leaf and frame, the seals, the frame-to-wall joint and the quality of installation. That is why we ask about wall construction on project orders instead of quoting a door in isolation.
Yes. Sizes are customizable, the face can be printed in different colours and wood-grain effects, and hardware is chosen per model. For own-brand ranges we produce OEM zinc alloy room doors to an agreed finish, size and hardware specification — send the schedule and the finish you have in mind and we will confirm what is possible before production.
Yes. We supply wholesale zinc alloy interior doors to distributors, wholesalers, contractors and developers, alongside aluminium glass doors and the rest of the door range. Orders are quoted from your schedule — sizes, quantities, finishes and phasing — so tell us how the order is likely to be split across the project.
The overall size is measured across the outside of the frame and is the figure that has to suit your wall opening. The sight size is what you see of the leaf when the door is closed. We quote both for every door; when you order, give us the structural opening as measured on site and tell us which figure your drawing uses, so the frame is made to the right dimension.