Door Leaf Options
The HB2508 aluminum glass bathroom door is built around one straightforward idea: an aluminum alloy frame carries the structure, and a glass panel keeps the entrance light. In a bathroom that combination does two jobs at once. It gives the room a surface that copes with steam and regular washing, and it avoids the solid slab of panel that a conventional door puts at the end of a small room.
These aluminum interior doors with glass are supplied for master and guest bathrooms, family bathrooms, hotel and serviced-apartment bathrooms, and villa or apartment bathrooms. The leaf is not built on a wood-based core, so it behaves differently from a timber door in a room that is wet every day — no swelling along the edges and no grain to lift under a damp cloth.
Every door is put together from a small set of choices the buyer controls: glass type and treatment, frame finish, width and height, handle, lock, hinges, opening direction and packing. A distributor can run one recognizable family of wholesale aluminum washroom doors across a catalogue with those choices, and a contractor can hold the same specification across every bathroom in a building.
As an aluminum glass washroom door supplier, we keep those choices consistent from one order to the next so that a repeat shipment matches the doors already on site. The bathroom door also sits inside a wider interior door range, which means it can be planned alongside bedroom doors, partition doors and door hardware rather than bought as a separate item.
| Property | Specification |
|---|---|
| Model | HB2508 |
| Product type | Bathroom door with glass panel |
| Frame material | Aluminum alloy |
| Glass options | Tempered, frosted or fluted glass |
| Glass treatments | Clear, frosted, matte or textured, per project |
| Leaf configuration | Single leaf, hinged |
| Frame finishes | Black, white, gray, coffee, champagne (golden) |
| Handle | Lever handle |
| Lock | Supplied to the project's lock configuration |
| Hinges | Selected to door size and expected use |
| Opening direction | Confirmed against the site |
| Sizing | Width and height made to the opening |
How much the panel should hide
The first decision on aluminum glass bathroom doors is visibility. Frosted or opaque glass breaks up direct sightlines into the bathroom while still passing daylight, which is why it is the usual choice when the door faces a hallway, a landing or a bedroom. Clear glass suits an en-suite that is already screened from the sleeping area, or a design where the glass is meant to be seen through. Between those two ends sit the intermediate treatments — a light frost, a heavier diffusion, a reeded or fluted surface — and the difference is judged most reliably on a sample held in the room's own lighting rather than on a screen.
Glass types and surface treatments
The range covers tempered glass, frosted glass and fluted glass, with clear, frosted, matte and textured treatments available according to the project. Fluted glass runs a vertical texture across the panel: it distorts shapes enough to blur a silhouette while keeping the light, and it adds a line pattern that reads well against tiled walls. Frosted glass gives an even diffusion with no pattern and pairs more quietly with marble, stone and plain tiles. Tempered glass is normally specified where the panel has to take knocks in daily use, such as a family bathroom or a hotel room serviced by housekeeping.
Frosted glass interior doors for bathrooms are the specification we are asked for most often, because they solve the privacy question without darkening the room. The right density depends on how close the door is to the space it faces, so the useful reference is the actual viewing distance on site, not a generic level.
What decides the finished result
The glass is only one part of the assembly. Frame construction, the seal between glass and frame, the fit of the leaf in its opening and the way the aluminum alloy frame is fixed to the wall all change how the finished door behaves. Glass requirements for doors also vary by market, so confirm the local building requirements for the destination country before the specification is fixed, and raise any project-specific requirement with us at quotation stage.
Boniven is a China-based sourcing and export partner for building material buyers. We work with a network of more than 100 vetted manufacturers and suppliers, which lets you consolidate different categories into one order instead of managing several factories yourself. Our team handles supplier matching, specification checks, inspection before loading, customisation coordination and export paperwork, and we plan shipments around your project phases or your regular replenishment cycle. Send us your market, target price level and delivery window, and we will map the supply chain behind your order.
Yes, as long as the whole door is specified for the room rather than just the frame. Aluminum interior doors with glass handle damp air well because the frame has no wood-based core that can swell and the panel does not absorb water, so daily steam and washing do not change the shape of the leaf. The parts that still need attention are the hinges, the lock and the seal, which is why their finishes are agreed for a humid room before the order is released. Good ventilation and a properly sealed frame do the rest.
Tempered glass, frosted glass and fluted glass are the three options for this door, and each can be supplied clear, frosted, matte or textured depending on the project. A bathroom door with glass panel is normally matched to the privacy the room needs rather than chosen by name: tell us what the door faces and how much should be visible, and we will propose the glass type and treatment.
Yes. Frosted or opaque glass reduces direct visibility into the bathroom while keeping the entrance bright, which is what most homes and hotels ask for. Frosted glass interior doors for bathrooms come in different densities, so a light frost blurs a silhouette and a heavier frost hides it — worth checking on a sample in the room's own lighting and at the real viewing distance. Where the bathroom is already screened, clear glass is also possible.
The standard range is black, white, gray, coffee and champagne (golden). Project-specific colours and finishes can be discussed against the surface treatments available at the time. For OEM aluminum washroom doors, send the reference panel, tile or colour code you want to match and we will confirm what can be produced before the order is placed.
Yes. We work with hotel, serviced-apartment and residential developers on bathroom doors that repeat across rooms, floors and blocks, keeping the same glass, frame colour and hardware consistent through the package. Send the room types, quantities and any door schedule and we will build the specification from it.
Yes. Width, height, frame configuration, glass specification and hardware are set against the opening rather than taken from one standard size. For OEM aluminum washroom doors we work directly from your door schedule; for a single building we work from the measured opening and the wall thickness on site.
Yes, and renovation is one of the most common uses, because the door is made to the opening that already exists instead of the opening being rebuilt. Wholesale aluminum washroom doors for renovation are quoted from measured sizes, and wall thickness, plumb and fixing conditions are confirmed before production so the frame fits the first time.